Orion XTREME 200 - POWER CONNECTIONS; Recommended Power Wiring

SYSTEM PLANNING SYSTEM 5
System 5 uses two 4-channel amplifiers for the front and rear satellites and two 2-channel amplifiers for two subwoofers. This system is designed
to really rock.
Amplifier 1
• Amplifier 1 is configured for 2-channel stereo operation
• Lowest recommended impedance is 4Ω per channel stereo
• Amplifier channels configured for high-pass operation
• Amplifier is configured for 2-channel input
Amplifier 2
• Amplifier 2 is configured for 2-channel stereo operation
• Lowest recommended impedance is 4Ω per channel stereo
• Amplifier channels configured for high-pass operation
• Amplifier is configured for 2-channel input
page 17
Amplifier 3
• Lowest recommended impedance is 4Ω mono
• Amplifier channels configured for low-pass operation
• Amplifier is configured for summed bridged operation
Amplifier 4
• Lowest recommended impedance is 4Ω mono
• Amplifier channels configured for low-pass operation
• Amplifier is configured for summed bridged operation
+
–
+
–