SPEAKER CONNECTIONS TWO-CHANNEL BRIDGED CONFIGURATION
• Front and rear channels are configured for bridged 2-
channel operation
• Lowest recommended impedance for both front and rear
channels is 4Ω
• Crossover and gain configurations are independently
adjustable between the front and rear channels
• 2-channel operation is recommended for this operational
mode
• Front and rear outputs can be configured for high-pass,
low-pass or full range operation
• Front and rear outputs can be configured for stereo (front
channels will have right output, rear channels will have
left output or summed 2-channel operation
page 25
+
+
–
–
To Next Page
Loading...
