Orion XTREME 600.4 - Speaker Connections for XTREME Amp; 4-Channel Stereo Speaker Setup

SPEAKER CONNECTIONS 4-CHANNEL STEREO CONFIGURATION
• Front and rear channel lowest recommended
impedance is 2 ohm stereo
• Crossover, output and gain configurations
are independently adjustable between the
front and rear channels
• 2-channel or 4-channel input can be used for
this configuration. For source unit fading,
use the 4-channel input mode
• Front outputs can be configured for high-
pass, low-pass or bandpass operation.
• Front channels equipped with INTELLiQ
subwoofer optimization circuitry.
• Rear outputs can be configured for high-
pass, low-pass or full range operation
• Front and rear outputs can be configured for
either stereo operation or summed for
subwoofer applications
page 20
+
–
+
–
+
–
+
–
–
+
+
–
+
–
+
–