Page 18 Operation Manual - 2500
ENGLISH
The ashes should be placed in a metal container with a tight lid. The container should be placed
on a non-combustible surface, away from any material that may catch fire. If the ash is to be
buried or locally dispersed, it should be kept in the closed container until it is completely cooled.
The use of a domestic, central or commercial vacuum cleaner to maintain the stove is not
recommended. The use of an ash vacuum cleaner is strongly recommended.
Burn pot
Remove and empty burn pot Scrape, if necessary
Combustion Chamber
Clean the combustion chamber by vaccuming the cooled ashes. When necessary, brush the walls and
vacuum the ashes afterwards.
You can also push the ashes into the ash drawer through the opening at the bottom of the firebox. In
this case alone, the ashes do not have to be cold.
Remove ash plug to sweep ashes in the ash drawer
To Next Page
Loading...
Need help?
General