Need help?Do you have a question about the OSD Audio SMP200 and is the answer not in the manual?
Audio Specifications| maximum output power | 120W/8Ω; 200W/4Ω |
|---|---|
| total harmonic distortion (THD) | 1% |
| frequency response | 20Hz-160Hz +/-1dB |
| signal to noise ratio | 95dB |
| input sensitivity | 200mV |
| crossover frequency | 35-160Hz |
| phase adjustment | 0-180° |
General Specifications| trigger input voltage | +12VDC to +24VDC |
|---|---|
| line voltage range | 110-120/220-240 VAC |
| standby power consumption | 1.8W |
Weight and Dimensions| dimensions (W x H x D) | 8.5” x 1.75” x 9.8” (214mm x 250mm x 44mm) |
|---|---|
| overall length (including knobs/connectors) | 10.7” (272mm) |
| weight | 2.9 lbs (1.32 kg) |
To Next Page
