Need help?Do you have a question about the OSD Audio SMP100 and is the answer not in the manual?
Describes the function and illumination of the green power indicator LED.
Describes the RCA jacks for stereo or mono line level audio input and auto-sensing.
Guidance on adjusting the subwoofer volume for a smooth transition with main speakers.
Instructions for adjusting the phase setting to achieve optimal sub audio output.
Explains how to set the crossover frequency for a natural transition to low frequencies.
Describes the function and illumination of the green power indicator LED.
Describes the RCA jacks for stereo or mono line level audio input and auto-sensing.
Guidance on adjusting the subwoofer volume for a smooth transition with main speakers.
Instructions for adjusting the phase setting to achieve optimal sub audio output.
Explains how to set the crossover frequency for a natural transition to low frequencies.
Audio| RMS output power | 80W/8Ω; 100W/4Ω |
|---|---|
| THD | 1% |
| Frequency response | 20Hz-160Hz +/-1dB |
| Signal to noise | 95dB |
| Input sensitivity | 200mV |
| Crossover | 40-160Hz |
| Phase | 0-180° |
General| Trigger input | +12VDC to +24VDC |
|---|---|
| Line voltage range | 110-120/220-240 VAC |
| Standby power | 1.8W |
Weight and Dimensions| Dimensions | 5.6”W x 1.8”H x 4.75” D (143mm W x 45mm H x 120mm D) |
|---|---|
| Overall length | 5.9” (150mm) |
| Weight | 1.75lbs (0.79kg) |
To Next Page
