Osmio Zero - Replacing the Pre Filter; Replacement of Main Filters

5 Filter maintenance
5.1 Introduction
First skip to section 5.2.4 to read about sanitisation and descaling (if you
live in a hard water area) then come back to this section.
Use the company's certified filters. Disconnect the power. Do not
disassemble or attempt to modify this product.
5.2 Filter replacement
5.2.1 Replacing the Pre Filter
• The pre-filter (PP) screwed in inside the supply tank should be changed
every 6 months. or when needed (e.g. if blocked by poor source water).
STEP 3 Unscrew the used pre filter
and screw in the new one
STEP 2 Lift the supply tank
vertically up and out out keeping
it flat
STEP 4 Swivel the filter to align the
current month number to the
replacement mark indicator
STEP 1 Open the lid of the supply
tank and wait for 5 seconds
11