Osmio Zero - Resetting the System After Filter Change; Sanitisation and Descaling

STEP 4 Pull out the Post Filter slowly
with your finger and insert a new
one fully.
STEP 5 Start with the new Carbon
Filter so the label is on the left hand side
twist the filter on anticlockwise.
Repeat the same with the
Membrane Filter.
STEP 6 Fill the Supply Tank
and place on the base and
close the lid.
STEP 7 Press and hold the button
and at the same time connect
the power plug to the socket.
(the sytem will make a beep sound).
Now perform a full system reset - 5.2.3.
13