22
Control unit operation – Changing the torque (P4)
Adjustable range from 5 up to 50 Ncm, intermediate stage 32 Ncm. Keeping PLUS / MINUS depressed activates
the repeat function and the values are continuously increased / decreased.
When changing from 5 to 50 Ncm and 50 to 5 Ncm, a longer confirmation signal is heard.
When the adjustable torque in the forward/reverse drive mode is reached, the motor switches off automatically.
➊ Press Program button P4
➋ Increase torque in 5-Ncm-steps
➋ Decrease torque in 5-Ncm-steps
To Next Page
Loading...
