1270047_1
EN | Safety
7
1.3 Declaration of conformity
EU DECLARATION OF CONFORMITY
We hereby confirm that our products comply with the requirements in the following
EU-directives and harmonised standards and regulations.
Manufacturer: H. ÖSTBERG AB
Industrigatan 2
SE-774 35 Avesta, Sweden
Tel No +46 226 860 00
Fax No +46 226 860 05
http://www.ostberg.com
info@ostberg.com
VAT No SE 556301-2201
Products: Duct fans: CK, RK, RKC, RKB, LPKB, LPKBS, IRE, IRB, BFS, BFC
Wall fans: CV, KV, RS
Roof fans: TKK, TKS, TKC, TKV, TKH
Exhaust fans: IFK, IFA, CAU
Supply air units: SAU
This EU declaration is applicable for products including our accessories for mounting and installation only if the
installation is made in accordance with the enclosed installation instructions and that the product has not been modified.
Low Voltage Directive (LVD) 2014/35/EU
Harmonised standards:
x EN 60335-1:2012, AC 1, A 13 R1, A 11, A 12, A 13, A 1, A 14, A2, Household and similar electrical appliances - Part 1:
General requirements
x EN 60335-2-80:2003, A 1, A 2, Household and similar electrical appliances - safety- Part 2: Particular requirements for
fans
x EN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with
regard to human exposure
Directive for Electromagnetic Compatibility (EMC) 2014/30/EU
Harmonised standards:
x SS-EN IEC 61000-6-1:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential,
commercial and light-industrial environments
x SS-EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial
environments
x SS-EN 61000-6-3:2007, A1, Electromagnetic compatibility (EMC) - Generic standards - Emission standard for
residential, commercial and light-industrial environments
x SS-EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial
environments
Machinery Directive (MD) 2006/42/EC
Harmonised standards:
x EN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction
x EN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower
limbs.
x EN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
Ecodesign Directive 2009/125/EC
Harmonised regulation:
x 1253/2014 Ecodesign requirements for ventilation units
x 1254/2014 Energy labeling of residential ventilation units (Where applicable)
Standards:
x SS-EN 13141-4, SS-EN 13141-8, SS-EN 13141-11 or EN 13053
RoHS 2011/65/EU, 2015/863/EU
Harmonised standards:
x EN IEC 63000:2018
Avesta 2020-11-30
Mikael Östberg
Product Manager
1270047_utg1_RS_sveng.indd 7 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 7EN_SE_Manual_RS_1270047u1.pdf 7 2020-12-21 16:11:082020-12-21 16:11:08
To Next Page
Loading...
Need help?
General
