1270047_1
8
EN | Warranty
2 Warranty
The warranty’s validity according to the purchase agreement is calculated from the day of purchase.
2.1 Extent of the warranty
The warranty covers faults that occur during the warranty period that have been notifi ed to the dealer
or which have been verifi ed by H.Östberg AB (underwriter) or the warranty provider’s representative.
Faults are defects in manufacture and materials as well secondary failures that occur due to these.
The above faults must be remedied so that the product is operational.
2.2 General limitations in the warranty
The warranty provider’s liability is limited according to these warranty conditions and the warranty
does not cover injury or damage to people or property. Verbal promises that are made in addition to
the warranty agreement are not binding on the warranty provider.
2.3 Limitations in the warranty
The warranty applies on condition that the product is used in the normal manner or under equivalent
circumstances and that the user instructions are followed.
The warranty does not cover faults that are caused by:
• Transport of the product.
• Unintended use or overloading of the product.
• Failure on the part of the user to follow the instructions regarding installation, use,
maintenance and care.
• Incorrect installation or incorrect positioning of the product.
• Conditions that are not the responsibility of the warranty provider, e.g. excessive variations
in voltage, lightning strike, fi re and other accidents.
• Repairs, maintenance and changes that are performed by unauthorised parties.
The warranty does not cover:
• Faults that do not affect operation, for example scratches to the surfaces.
• Parts that are exposed to greater risk of fault than normal due to handling or normal wear
and tear, for example lamps, glass, ceramics, paper or plastic parts, fi lters and fuses.
• Settings, information on use, care, service or cleaning that are typically described in the user
instructions, or damage that is caused by the user failing to observe warnings or installation
instructions, or inspection of such.
The warranty provider is only responsible for the operation if approved accessories are used. The war-
ranty does not cover product faults that are caused by other manufacturers’ accessories or equipment.
The unit’s current settings must be recorded in the installation and assembly instructions at installation
in order to avoid costs in the event of fault. The warranty provider is not responsible for costs such as
adjustment costs when changing fans and mainboards in the unit.
2.4 Service conditions during the warranty period
The conditions apply according to the agreement with the local dealer.
1270047_utg1_RS_sveng.indd 8 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 8EN_SE_Manual_RS_1270047u1.pdf 8 2020-12-21 16:11:082020-12-21 16:11:08
To Next Page
Loading...
Need help?
General
