1270047_1
EN | Transport and storage
9
2.5 Corrective measures in the event of detected faults
If a fault is detected, the customer must notify this to the dealer.
Shipping damage must be notifi ed to the shipping agent upon delivery. State which product applies
(part and serial number as per the name plate) and describe the fault and how this has occurred as
accurately as possible.
In order for warranty repair to be performed, the customer must demonstrate that the warranty is valid
by presenting a purchase receipt. Once the warranty period has expired, claims that were not made
in writing before expiry of the warranty period will not be valid. In other regards, this shall occur in
accordance with the sales conditions.
3 Transport and storage
3.1 General
The fan must be transported in its packing until installation. This prevents transport
damages, scratches and the fan from getting dirty.
The fan must be stored in a protected and dry space before installation.
3.2 Checking the delivery
1. Inspect the unit carefully upon delivery to check for any damage that may have occurred
during transport. Immediately inform the manufacturer in the event of severe damage.
Note! The manufacturer cannot be held liable for damage to the fan during transport,
even if the manufacturer has appointed the shipping agent.
2. Check that the delivery contains all ordered parts.
The following parts will be included in the delivery:
• Manual for installation, operation and maintenance.
3. Contact your dealer if anything is missing.
1270047_utg1_RS_sveng.indd 9 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 9EN_SE_Manual_RS_1270047u1.pdf 9 2020-12-21 16:11:082020-12-21 16:11:08
To Next Page
Loading...
Need help?
General
