4
4. Screw on the threaded Retaining Ring. It must be tightened so no meat fibers can lodge
between Cutting Blade and Disc to hinder grinding.
5. A handy wrench is included for loosening tight retaining rings. Simply attach wrench
to retaining ring and turn counterclockwise.
HOW TO ATTACH GRINDER HEAD
1. Disconnect electric cord.
2. Loosen knob on side of Power Unit and insert
Grinder Head in opening. Maintain a light force
to hold Grinder Head in place. Rotate Grinder
Head (1) to the left to approximate position
shown, then (2) to the right to the approximate
position shown, and then (3) back to the center.
This procedure insures that the Food Grinder
Head snaps into the correct position.
3. Tighten knob securely.
4. Turn unit ON and feed food into Food Hopper.
Use Food Pusher to guide food down into screw.
To Next Page
Loading...