How Your Osterizer Blender Works
Your Osterizer blender is a multi-speed appliance which operates on a wide range of speeds from very
slow to very fast. This range of speeds makes food preparation easy, interesting and also saves time
because your Osterizer blender processes foods in seconds.
In addition your Osterizer blender has 2 distinct methods of operation, CONTINUOUS run for blend-
ing, liquefying and fine chopping and CONTROLLED CYCLE BLENDING, used for coarse chopping
pieces of food, such as chopped vegetables, nuts or cheeses. There are several different ways of oper-
ating the CONTROLLED CYCLE BLENDING feature but all involve turning the motor “on” and “off”
intermittently. During the “on” portion of the cycle, food is chopped and tossed away from the blades.
During the “off” portion of the cycle the food is distributed around the blades to make processing
more uniform. IN ALL THE RECIPES GIVEN IN THIS BOOK, THE CONTROLLED CYCLE BLENDING
FEATURE IS REFERRED TO AS A CYCLE.
NOTE: A cycle consists of operating the blender for about 2 seconds and then allowing the blades to
coast to a stop
How to
UseYour
8 and 10 Speed Blender
The 3 buttons marked, CHOP GRATE and GRIND are “CYCLE” or “PULSE” operation buttons, they
also function as the OFF switch. As long as one of these buttons is held down the motor
operates-
as soon as the button is released, the motor shuts off. The additional buttons are for continuous oper-
ation
FOR CONTROLLED CYCLE OPERATION
Rest hand on container and push desired “Cycle” or “Pulse” button. Hold the button down for about 2
seconds, then release and allow the blades to coast to a stop. Repeat for number of cycles as speci-
fied in recipe. Release of a “Pulse” button turns the blender off.
FOR CONTINUOUS OPERATION
Rest hand on container and push desired speed button. When processing is finished, press and
release one of the “Pulse” buttons, or the “OFF” button to turn the blender off.
6
To Next Page
Loading...
Need help?
General
