How to Use Your Dual Range 12,14
or
16-Speed
Blender
12 speed- Speed is selected by using the speed buttons and the rotary switch which selects the high
or low range of the speed buttons. ON, OFF and PULSE are controlled by the buttons marked ON,
OFF or PULSE.
There are two types of 14 Speed blenders.
14 speed [Type 11 - Speed is selected by using the speed buttons and the rotary switch which
selects the high or low range of the speed buttons. There is an ON button and one button which con-
trols OFF and PULSE.
14 [Type 21 or 16 Speed
-
Speed is selected by using the speed buttons and the buttons marked
by high and low which selects the high or low range of the speed buttons. There is a seperate
PULSE button and a rotary switch to turn blender ON or OFF.
FOR CONTROLLED CYCLE OPERATION
With rotary switch in PULSE-OFF position or OFF button pressed, rest hand on container. Select and
press proper speed and speed range (HI and LO). Then press the PULSE button and hold in for about
2 seconds. Release button and allow blades to coast to a stop. Repeat for number of cycles as speci-
fied in recipe. Release of the PULSE button turns the blender off.
CONTINUOUS OPERATION
Rest hand on container, press speed and range buttons. Move rotary switch to ON position or press
the ON button. When processing is finished, move rotary switch to “PULSE OFF” position or press
the OFF button.
To Process Food
1. Assemble container (see page 5, Assembly of Container).
2. Put ingredients into blender container, cover firmly, and place container into ring on motor base
(see page 5, Tightening the Container).
FOR CONTROLLED CYCLE OPERATION
Select the proper speed, rest hand on container and activate the blender for about 2 seconds, Repeat
this procedure for as many cycles as required by the recipe. (See page 6-7 for detailed instructions for
controlled cycle operation of the specific blender you own.)
FOR CONTINUOUS OPERATION
Select the proper speed, turn blender on to begin processing. When processing is completed, turn
blender off (See pages 6-7 for detailed instructions for continuous operation of the specific blender
you own.)
CAUTION: NEVER LEAVE BLENDER WHILE IT IS PROCESSING. If container should turn while motor
is on, switch it OFF immediately and tighten jar in container. (See page 5, Tightening the Container,)
To Next Page
Loading...
