Parts List & Operating Instructions
Safety Precautions
CAUTION: To prevent personal injury and/ or property damage,
•
Study, understand, and follow all safety precautions and operating instructions before
using these transmission adapters. If the operator cannot read instructions, operating
instructions and safety precautions must be read and discussed in the operator’s native
language.
•
Only qualied operators may install, operate, adjust, maintain, clean, repair, inspect, or
transport these transmission adapters.
•
Wear eye protection that meets ANSI Z87.1 and OSHA standards.
•
Do not exceed the rated capacity of these transmission adapters as stated in this document
and on the warning decal.
•
These adapters are designed to work together in a group of four. Using fewer than four
adapters in a setup could result in personal injury caused by the load tipping or falling.
•
Do not use these transmission adapters for anything other than their intended purpose.
•
Use the ratchet strap included to secure the load to the transmission jack.
•
No alteration shall be made to this product.
•
Inspect the condition of the transmission adapters before each use; do not use if damaged,
altered, or in poor condition.
•
Use only those repair parts called out in the parts list in this document. Items found in
the parts list have been carefully tested and selected by OTC.
Explanation of Safety Signal Words
Thesafetysignalworddesignatesthedegreeorlevelofhazardseriousness.
DANGER:Indicatesanimminentlyhazardoussituationwhich,ifnotavoided,willresultindeathor
serious injury.
WARNING
:Indicatesapotentiallyhazardoussituationwhich,ifnotavoided,couldresultindeathor
serious injury.
CAUTION
:Indicates a potentiallyhazardous situation which,if not avoided,may result inminor or
moderate injury.
CAUTION
: Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided,mayresultinpropertydamage.
To Next Page
Loading...
