oticon Alta2 Pro - Put on the hearing aid with thin tube

26 27
Thin tube (Corda miniFit)
Read the following pages if your hearing aid has a thin tube
(Corda miniFit) with either a dome, Grip Tip or Micro mould as earpiece.
Corda miniFit is a thin tube
that brings the sound into
your ear. The thin tube should
always be used with an ear
piece attached. Use only
parts designed for your
hearing aid.
Ear grip (optional)
Thin tube
Put on the hearing aid with thin tube
Place the hearing aid
behind your ear.
Hold the bend of
the tube between
your thumb and
index nger. The
earpiece should point
towards the ear canal
opening.
Gently push the
earpiece into your ear
canal until the thin
tube sits close against
the side of your head.
If the thin tube has an
ear grip , place it in the
ear so it follows the
contour of the ear.
Step 1 Step 2 Step 3
About Start up Handling Options Warnings More info