32 33
About Start up Handling Options Warnings More info
Customised earpieces for thin tube
Micro moulds are available in two dierent materials.
Micro mould
Wax lter
Clean Micro mould
The Micro mould should be
cleaned regularly.
The Micro mould has a white
wax lter that must be replaced
when clogged, or if the hearing
aid does not sound normal.
Clean the vent by
pressing the brush
through the hole,
twisting it slightly.
Vent
IMPORTANT NOTICE
Always use the same type of wax lter as was originally supplied with the
hearing aid. If you are in any doubt about the use or replacement of wax
lters, contact your hearing care professional.
To Next Page
Loading...
