oticon Opn 1 miniRITE - Replace ProWax miniFit Filter

24 25
About Startup Handling Options Tinnitus Warnings More info
IMPORTANT NOTICE
Always use the same type of wax filter as was originally supplied with
the hearing aid. If you are in any doubt about the use or replacement of
wax filters, contact your hearing care professional.
ProWax miniFit lter
The speaker has a white wax filter
attached to the end where the earpiece
is attached. The wax filter keeps wax
and debris from damaging the speaker.
Replace the wax filter or contact your
hearing care professional if the filter
becomes clogged or the hearing aid
does not sound normal.
Remove the earpiece from the speaker
before replacing the wax filter.
Wax filter
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool
from the shell. The
tool has two pins,
one empty for re-
moval and one with
the new wax filter.
Push the empty pin
into the wax filter in
the speaker and pull
it out.
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
1. Tool
New
filter
Old
filter
Final
Note:
If you use a mold or LiteTip, your hearing care professional must replace the wax
filter in the speaker.