oticon Opn 2 - Replace T-Cap and O-Cap Filters

24 25
About Startup Handling Options Tinnitus Warnings More info
Replace T-Cap lter
(hearing aids with 10 batteries)
2. Remove 3. Insert
Remove the tool from
the packaging. The
tool has two ends,
one for removal and
one with the new
T-Cap lter.
Push the tool fork
under the top edge
of the used T-Cap
lter and lift it out.
Insert the new T-Cap
lter and remove the
tool by twisting it
slightly. Throw the tool
out after use.
1. Tool
new lter
Replace O-Cap lter
(hearing aids with 312 and 13 batteries)
2. Remove 3. Insert
Remove the tool from
the packaging. The
tool has two ends,
one for removal and
one with the new
O-Cap lter.
Push the pointed end
of the tool into the
existing O-Cap lter
and pull it out.
Insert the new O-Cap
lter using the other
end of the tool, remove
the tool and throw it
out.
1. Tool
new lter