oticon Opn 2 - Technical Information

60 61
About Startup Handling Options Tinnitus Warnings More info
Technical information
The hearing aid contains two radio
technologies (optional), which are
described below:
The hearing aid contains a radio
transceiver using short range magnetic
induction technology working at
3.84 MHz. The magnetic eld strength
of the transmitter is very weak and is
always below -40 dBμA/m at a
10 metre distance.
The hearing aid also contains a
radio transceiver using Bluetooth
Low Energy (BLE) and a proprietary
shortrange radio technology, both
working at 2.4 GHz.
The 2.4 GHz radio transmitter is weak
and is always below 4 dBm e.i.r.p. in
total radiated power.
The hearing aid complies with
international standards concerning
electromagnetic compatibility and
human exposure.
Due to the limited space available on
the hearing aid, relevant approval
markings can be found in this booklet.
Additional information can be found
in the “Technical Data sheets” on
www.oticon.global
USA and Canada
The hearing aid contains a radio
module with the following
certication ID numbers:
CIC NFMI instruments
contain a module with:
FCC ID: U28-AUCIC
IC: 1350B-AUCIC
ITC, ITE HS & ITE FS 2.4 GHz
instruments contain a module with:
Battery size 13:
FCC ID: U28-AUITE13
IC: 1350B-AUITE13
Battery size 312:
FCC ID: U28-AUITE312
IC: 1350B-AUITE312
The device complies with Part 15 of the
FCC Rules and with Industry Canada’s
licence-exempt RSSs.
Operation is subject to the following
two conditions:
1. This device may not cause harmful
interference.
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
Changes or modications not expressly
approved by the party responsible
for compliance may void the user’s
authority to operate the equipment.