22 23
About Startup Handling Options Tinnitus Warnings More info
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool from
the shell. The tool
has two pins, one
empty for removal
and one with the
new ProWax mini
lter.
Push the empty pin
into the ProWax mini
lter in the hearing
aid and pull it out.
Insert the new ProWax
mini lter using the
other pin, remove the
tool and throw it out.
1. Tool
New
lter
Filter replacement
The lters keep wax and debris from damaging the hearing aid.
If the lters becomes clogged, please replace the lters or contact
your hearing care professional.
• Prowax miniFit filter protects the sound outlet.
• O-cap and T-cap protect the microphone inlet.
Please refer to the following pages for instructions on how to replace
the appropriate lters.
IMPORTANT NOTICE
Always use the same type of wax lter as was originally supplied with the
hearing aid.
If you are in any doubt about the use or replacement of wax lters, contact
your hearing care professional.
To Next Page