oticon Ruby 2 User Manual

33
Replace ProWax miniFit lter
2. Remove 3. Insert
Remove the tool
from the shell. The
tool has two pins,
one empty for re-
moval and one with
the new wax filter.
Push the empty pin
into the wax filter in
the speaker and pull
it out.
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
1. Tool
New
filter
New
filter
Empty
pin
Old
filter
Final
Note:
If you use a mold or LiteTip, your hearing care professional must replace the wax filter
in the speaker.

oticon Ruby 2 Specifications

General

Model	Ruby 2
Category	Hearing Aid
Bluetooth Connectivity	Yes
Noise Reduction	Yes
Feedback Management	Yes
Manufacturer	Oticon
Styles	Behind-the-Ear (BTE)
Wireless	Yes
Power Level	Standard
Water Resistance	IP68
Frequency Range	Up to 8 kHz
Fitting Range	Mild to severe hearing loss