oticon Ruby 2 User Manual

35
New
filter
Replace ProWax lter
2. Remove 3. Insert
Remove the tool
from the shell. The
tool has two pins,
one empty for
removal and one
with the new wax
filter.
Push the empty pin
into the wax filter
in the earpiece and
pull it out.
Insert the new wax
filter using the other
pin, remove the tool,
and throw it out.
1. Tool
New
filter
Old filter

oticon Ruby 2 Specifications

General

Model	Ruby 2
Category	Hearing Aid
Bluetooth Connectivity	Yes
Noise Reduction	Yes
Feedback Management	Yes
Manufacturer	Oticon
Styles	Behind-the-Ear (BTE)
Wireless	Yes
Power Level	Standard
Water Resistance	IP68
Frequency Range	Up to 8 kHz
Fitting Range	Mild to severe hearing loss