oticon Ruby 2 User Manual

43
Mute
Use the mute function if you need to silence the hearing aid.
Your hearing aid can be muted by using one of the following
optional devices:
Oticon ON app
ConnectClip
Remote Control 3.0
How to unmute your hearing aid
The hearing aid can be unmuted using one of the optional devices
or by applying a short press to the upper or lower part of the button
on the hearing aid.
IMPORTANT NOTICE
Do not use the mute function as an off switch, as the hearing aids are
still using battery power in this mode.

oticon Ruby 2 Specifications

General

Model	Ruby 2
Category	Hearing Aid
Bluetooth Connectivity	Yes
Noise Reduction	Yes
Feedback Management	Yes
Manufacturer	Oticon
Styles	Behind-the-Ear (BTE)
Wireless	Yes
Power Level	Standard
Water Resistance	IP68
Frequency Range	Up to 8 kHz
Fitting Range	Mild to severe hearing loss