oticon Ruby 2 User Manual

55
If the volume control is activated
A warning may be displayed if you activate the tinnitus volume
control in the “Buttons & Indicators” screen. This occurs if the relief
sound can be listened to at levels that may cause hearing damage.
The “Max wearing time” table in the fitting software displays the
number of hours the patient can safely use Tinnitus SoundSupport.
• Note the max wearing time for each program for which Tinnitus
SoundSupport is activated.
• Write those values in the table: “Tinnitus SoundSupport:
Limitation on use”, in the back of this booklet.
• Instruct your patient accordingly.

oticon Ruby 2 Specifications

General

Model	Ruby 2
Category	Hearing Aid
Bluetooth Connectivity	Yes
Noise Reduction	Yes
Feedback Management	Yes
Manufacturer	Oticon
Styles	Behind-the-Ear (BTE)
Wireless	Yes
Power Level	Standard
Water Resistance	IP68
Frequency Range	Up to 8 kHz
Fitting Range	Mild to severe hearing loss