72
About Start-up Handling Options Tinnitus Warnings More info
Technical information
The hearing aid contains two radio
technologies which are described
below:
The hearing aid contains a radio
transceiver using short range
magnetic induction technology
working at 3.84 MHz. The magnetic
field strength of the transmitter is
very weak and always below 15 nW
(typically below –40 dBμA/m
(–12.20 dBμA/ft) at 10 meter
(33 feet) distance).
The hearing aid also contains a radio
transceiver using Bluetooth Low
Energy (BLE) and a proprietary short-
range radio technology, both working
at 2.4 GHz. The 2.4 GHz radio trans-
mitter is weak and is always below
4 dBm e.i.r.p. in total radiated power.
The hearing aid complies with inter-
national standards concerning elec-
tromagnetic compatibility and human
exposure. Only use your hearing aid
in areas where wireless transmission
is permitted.
Due to the limited space available on
the hearing aid, relevant approval
markings can be found in this booklet.
Additional information can be found
in the “Technical Data sheets” on
www.oticon.com
To Next Page
Loading...
Need help?
General
