18 19
About Start-up Handling Options Tinnitus Warnings More info
Clean the mold
The mold should be cleaned
regularly. Use a soft cloth to clean
its surface. Use the MultiTool wire
loop to clean the opening.
Replace the tube
The tubing between the mold
and the hearing aid should be
replaced if it becomes yellow
or stiff. Consult your hearing
care professional about this.
Wash the mold
Make sure you are
able to identify which
mold is for which
hearing aid before
disconnecting them
from the hearing aid.
Disconnect the tube
and mold from the
hook. Hold the hook
firmly when pulling
off the tube. Other-
wise the hearing aid
may be damaged.
Wash the mold and tube
using mild soap. Rinse
and dry completely
before reconnecting
to the hearing aid.
Step 1
Step 2 Step 3
To Next Page
Loading...
Need help?
General
