58 59
About Start-up Handling Options Tinnitus Warnings More info
Technical information
The hearing aid contains two radio
technologies, which are described
below:
The hearing aid contains a radio trans-
ceiver that uses short-range magnetic
induction technology working at
3.84 MHz. The magnetic field strength
of the transmitter is very weak and is
always below 15 nW (typically below
-40 dBμA/m at a 10 meter distance).
The hearing aid also contains a radio
transceiver using Bluetooth Low Energy
(BLE) and a proprietary short-range
radio technology both working at ISM
band 2.4 GHz. The radio transmitter is
weak and always below 3 mW equal to
4.8 dBm in total radiated power.
The hearing aid complies with interna-
tional standards concerning electromag-
netic compatibility and human exposure.
Due to the limited space available on the
hearing aid, relevant approval markings
can be found in this booklet.
Additional information can be found in
the “Technical Data sheet” on
www.oticon.com
The manufacturer declares that this
hearing aid is in compliance with the
essential requirements and other
relevant provisions of Directive
2014/53/EU.
Declaration of Conformity is available
from the manufacturer.
Manufactured by:
Denmark
Waste from electronic
equipment must be
handled according to
local regulations.
To Next Page
Loading...
Need help?
General
