24 25
About Start-up Handling Options Tinnitus Warnings More info
Mute
Use the mute function if you need to turn off the sounds temporarily,
while wearing the hearing aid. The mute function only mutes the
microphones on the hearing aid.
Optional LED
Continuous orange and green flashes indicate mute.
IMPORTANT NOTICE
Do not use the mute function as an off switch, as the hearing aid still draws
current from the battery in this mode.
To mute the hearing aid
Press either end of the volume button
for at least four seconds.
To reactivate, press either end of the
button briefly.
Use the hearing aid with iPhone and iPad
Your hearing aid is Made for iPhone® and allows for direct
communication and control with iPhone, iPad® or iPod touch®.
For assistance in using these products with your hearing aid, please
contact your hearing care professional.
For information on compatibility,
please visit www.oticon.com/support/compatibility
Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple
product(s) identified in the badge, and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Please note that use of this Accessory with iPod, iPhone, or iPad may affect wireless performance.
To Next Page
Loading...
Need help?
General
