Need help?Do you have a question about the OTO Biscuit and is the answer not in the manual?
General| Technology | Digital |
|---|---|
| I/O | Mono |
| Inputs | 1 x 1/4" TS |
| Outputs | 1 x 1/4" TS |
| Power Supply | 9V DC |
Overview of the front panel controls and their functions.
Description of the input/output and power connectors on the rear panel.
Illustrates typical audio and MIDI connections for the device.
Schematic diagram showing the internal signal flow of the BISCUIT.
Guide on adjusting the input gain and understanding the BYPASS indicator.
Modifies signal waveform using digital processing with 8 types of shaping.
An 8-bit mono delay effect with tempo synchronization and feedback control.
Applies 8-bit transposition to the signal with various pitch shift values.
Memorizes and plays back 8 filter cutoff frequency positions in sequence.
Instructions on how to save the current BISCUIT settings into one of 16 presets.
Procedure for loading saved presets, including navigating between preset banks.
Saving and recalling 8-bit configurations independently of full presets.
Handling parameter jumps when recalling presets by smoothing transitions.
Description of the 16 factory-installed presets and how to recall them.
Setting the MIDI channel for communication between BISCUIT and other devices.
Enabling or disabling various MIDI functions like Local Control and CC messages.
Saving and loading BISCUIT presets to/from a computer via SysEx messages.
Recalling BISCUIT presets using MIDI Program Change messages.
To Next Page