EasyManua.ls Logo

OTO Biscuit - 5.4 PROGRAM CHANGE

Default Icon
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
33
5.4 PROGRAM CHANGE
You can recall a BISCUIT preset from a MIDI controller or a computer using
PROGRAM CHANGE messages.
PROGRAM CHANGE allows you to recall 128 programs but there’s only 16
presets in BISCUIT memory.
The first 16 PROGRAM CHANGE messages (0 to 15) correspond to the 16
BISCUIT presets. The following 16 PROGRAM CHANGE messages (16 to
31) will correspond also to the 16 BISCUIT presets,...
The following table indicates which BISCUIT preset is recalled by a PRO-
GRAM CHANGE message
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
PRESETS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
PROGRAM CHANGE NUMBER
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
36
36
4/ RECEIVE ALL PRESETS : The switches 1 to 8 light up pink, waiting for
a SysEx file from the computer (you should send the SysEx file manually).
The 16 presets from the SysEx file are now stored in the BISCUIT’s 16
presets.
To exit the « MIDI SETTING » mode, press the BYPASS switch again while
pressing the BRAIN switch, or wait for 10 seconds. BISCUIT will revert to
its regular state.
The table shows you the content of BISCUIT’s SysEx DUMP messages.
SYSEX NOTA BENE :
If you encounters problems when sending or receiving presets by SysEx,
try to :
• set the delay between played messages or buffers of the program
being used to transfer the SysEx messages to 250 ms,
• reduce the transmit speed of the program being used to transfer
the SysEx messages,
• update the drivers for your MIDI interface,
• remove any devices between your interface and BISCUIT such as
MIDI thru boxes, mergers, splitters ...
• use another interface.
DESCRIPTION
SYSTEM EXCLUSIVE
OTO MACHINES ID 1
OTO MACHINES ID 2
OTO MACHINES ID 3
BISCUIT ID
PRESET DUMP CODE
PRESET NUMBER (00 TO 15)
PRESET PACKED DATA (40 BYTES)
END OF EXCLUSIVE
STATUS
0xF0
0x00
0x20
0x70
0x01
0x01
0xvv
0xvv
0xF7
35
35