Need help?Do you have a question about the otometrics MADSEN AccuScreen and is the answer not in the manual?
Specifies the intended applications and patient populations for the Type 1077 device.
Overview of managing patient records within the AccuScreen system.
Step-by-step guide for creating a new patient profile in AccuScreen.
Instructions on how to search for and select existing patient records.
Details on how to modify existing patient information.
General advice and procedures for preparing patients, especially newborns, for screening.
Procedure for gently inserting the probe with an eartip into the patient's ear canal.
Guidance on correct placement of electrodes on the patient for ABR tests.
Instructions for fitting ear couplers onto the patient's ears.
Introduction to the Transiently Evoked Otoacoustic Emissions (TEOAE) test.
Steps to initiate the TEOAE test, including calibration.
Details on monitoring the progress and parameters of an ongoing TEOAE test.
Guide to understanding the results and indicators of the TEOAE test.
Introduction to the Distortion Product Otoacoustic Emissions (DPOAE) test.
Details the test protocol, frequencies, and levels for DPOAE measurements.
Steps to initiate the DPOAE test, including calibration and speaker tests.
Monitoring the progress and parameters during a DPOAE test.
Guide to understanding DPOAE test results, including Pass/Clear and Refer/No Clear responses.
Defines the protocol and parameters for performing TEOAE measurements.
Instructions for initiating the TEOAE test procedure.
Monitoring the progress and key indicators during a TEOAE test.
Guide to understanding the outcomes and graphs of TEOAE tests.
Introduction to the Auditory Brainstem Response (ABR) test.
Steps to begin the ABR test, including electrode and cable connections.
Details on impedance checks and calibration procedures before ABR testing.
Monitoring test progress, pausing, and stopping the ABR test.
Guide to understanding the results and graphs of ABR tests.
Guide to conducting rapid tests without patient assignment, useful for demonstration.
Overview of accessing and performing various quality tests on the device and accessories.
Guidance on testing the functionality of the AccuScreen probe.
Step-by-step instructions for running the probe test.
Procedure for testing the functionality of the ABR electrode cable.
Procedure for testing the functionality of the ear coupler cable.
Procedure for testing electrode and ear coupler cables simultaneously.
Overview of methods for deleting patient records from the device.
Procedure for deleting an individual patient's data.
Instructions for deleting patients based on their last activity date.
Procedure for removing all patient data from the AccuScreen.
Guidance on the care and maintenance of the AccuScreen probe tip and body.
Detailed steps for cleaning and disinfecting the probe tip.
Instructions for safely cleaning the main body of the AccuScreen probe.
Instructions for cleaning the exterior surfaces of the AccuScreen unit.
Specifies the intended applications and patient populations for the Type 1077 device.
Overview of managing patient records within the AccuScreen system.
Step-by-step guide for creating a new patient profile in AccuScreen.
Instructions on how to search for and select existing patient records.
Details on how to modify existing patient information.
General advice and procedures for preparing patients, especially newborns, for screening.
Procedure for gently inserting the probe with an eartip into the patient's ear canal.
Guidance on correct placement of electrodes on the patient for ABR tests.
Instructions for fitting ear couplers onto the patient's ears.
Introduction to the Transiently Evoked Otoacoustic Emissions (TEOAE) test.
Steps to initiate the TEOAE test, including calibration.
Details on monitoring the progress and parameters of an ongoing TEOAE test.
Guide to understanding the results and indicators of the TEOAE test.
Introduction to the Distortion Product Otoacoustic Emissions (DPOAE) test.
Details the test protocol, frequencies, and levels for DPOAE measurements.
Steps to initiate the DPOAE test, including calibration and speaker tests.
Monitoring the progress and parameters during a DPOAE test.
Guide to understanding DPOAE test results, including Pass/Clear and Refer/No Clear responses.
Defines the protocol and parameters for performing TEOAE measurements.
Instructions for initiating the TEOAE test procedure.
Monitoring the progress and key indicators during a TEOAE test.
Guide to understanding the outcomes and graphs of TEOAE tests.
Introduction to the Auditory Brainstem Response (ABR) test.
Steps to begin the ABR test, including electrode and cable connections.
Details on impedance checks and calibration procedures before ABR testing.
Monitoring test progress, pausing, and stopping the ABR test.
Guide to understanding the results and graphs of ABR tests.
Guide to conducting rapid tests without patient assignment, useful for demonstration.
Overview of accessing and performing various quality tests on the device and accessories.
Guidance on testing the functionality of the AccuScreen probe.
Step-by-step instructions for running the probe test.
Procedure for testing the functionality of the ABR electrode cable.
Procedure for testing the functionality of the ear coupler cable.
Procedure for testing electrode and ear coupler cables simultaneously.
Overview of methods for deleting patient records from the device.
Procedure for deleting an individual patient's data.
Instructions for deleting patients based on their last activity date.
Procedure for removing all patient data from the AccuScreen.
Guidance on the care and maintenance of the AccuScreen probe tip and body.
Detailed steps for cleaning and disinfecting the probe tip.
Instructions for safely cleaning the main body of the AccuScreen probe.
Instructions for cleaning the exterior surfaces of the AccuScreen unit.
General| Brand | otometrics |
|---|---|
| Model | MADSEN AccuScreen |
| Category | Medical Equipment |
| Language | English |
To Next Page
