Need help?Do you have a question about the otometrics Madsen Zodiac and is the answer not in the manual?
Describes operation via keypad/display or PC software.
Lists the specific probe used with the device.
Lists supported tests like Tympanometry and Reflex Screening.
Explains integration with OTOsuite for testing and data management.
Explains how MADSEN Zodiac results integrate with the Noah database.
Details printing options via built-in printer or OTOsuite.
Device measures tympanic membrane mobility for middle ear function.
For audiologists, ENTs, and other healthcare professionals.
Used for clinical, diagnostic, and screening tympanometry and reflex measurements.
Details conditions and symptoms where testing is not recommended.
Explains the use of Warning, Caution, and Note statements.
Unpack the device and accessories carefully, retain packaging.
Visually inspect equipment for damage; contact distributor if damaged.
Verify all parts and accessories against the packing list.
Device location requirements and probe connection details.
Connecting power supply, initial power-on, and clock battery charging.
Procedures for switching the device on/off and connecting to a PC.
Instructions for printer installation, paper loading, and operation.
Identifies and explains probe body, ear button, and light indicator.
Provides instructions on fitting eartips and cleaning.
Demonstrates underhand and overhand grips for the probe.
Explains the 'New Session' and 'Report' buttons.
Details how to select tests like Tympanometry.
How to select the Reflex Screening test.
Choosing pure tone frequencies for reflex measurements.
Selecting broadband noise as a reflex stimulus.
Button to toggle between left and right ear selection.
Button to delete individual measurements.
How to perform a probe check.
Explains soft-buttons like Soft-button, Menu, Arrow Up/Down.
Describes the three-column menu structure for settings.
Guide on using arrow buttons and soft-buttons to navigate menus.
Covers changing settings, saving, canceling, and creating new sessions.
Includes operating without OTOsuite, test setup, probe fitting, and starting measurements.
Details probe status, leakage, blocked indications, and results display areas.
Explains specific tympanometry results and how to adjust or delete curves.
How to swap ear results if the wrong ear was selected.
Method for deleting single measurement curves.
How to print test results directly from the device.
Fetching patient test results from Zodiac to OTOsuite.
Lists potential causes for leakage or probe problems.
Emphasizes authorized service and repair for safety and warranty.
Covers probe replacement, cleaning procedures, and tip management.
Details on cleaning probes, tips, and recommended cleaning agents.
Instructions for cleaning the printer's paper compartment.
Information on regular equipment calibration according to standards.
Detailed steps for performing daily probe checks for functionality.
Covers measuring systems, acoustic reflex, stimulation, and timing.
Details air pressure, display, power, and operating environment.
Includes dimensions, weight, optional features, accessories, and disposal.
Outlines essential performance requirements and applicable standards.
Details EMC guidance, emissions, immunity, and safety precautions.
Explains safety symbols, compliance marks (CE, FCC, IC), and specific warnings.
Information on WEEE disposal and environmental compliance.
Covers manual adherence, intended use, handling, and service safety.
Procedures for preventing cross-infection with eartips and probe tips.
Warnings regarding static electricity, stacking, temperature, liquids, and flammable agents.
Addresses choking hazard from eartips and electrical connection safety.
Covers accessory calibration, radio interference, modifications, system assembly, and FCC compliance.
Directs users to online help, installation guides, and reference manuals for more information.
Provides company name, address, phone number, and website.
Details manufacturer's responsibility for safety, reliability, and performance.
General| Brand | Otometrics |
|---|---|
| Model | Madsen Zodiac |
| Tympanometry | Yes |
| Acoustic Reflex Testing | Yes |
| Masking | Yes |
| High Frequency Tympanometry | Yes |
| Display | Color LCD |
| Connectivity | USB |
| Compatibility | PC |
| Channels | 2 |
| Frequency Range | 226 Hz |
| Tests | Tympanometry, Acoustic Reflex |
| Weight | 5.5 kg |
| Power Supply | Mains |
| Display Type | Color LCD |
To Next Page
