11
1. ON/OFF button
Pushing this button allows to turn on or off the device.
Working indicator "
" on display of indoor unit will be green when device is turned on and will be red
when it’s turned off.
2. FAN button
Push this button to select the fan speed along this sequence:
Automatic (AUTO), low (
), medium-low ( ), medium ( ),
medium-high (
), high ( ).
NOTES:
• On AUTO speed, the device will choose ideal speed according to room temperature and set tempera-
ture.
• In DRY mode (dehumidification), fan always goes at low speed.
3. MODE button
Push this button in order to select operating mode of your choice:
AUTO mode:
When you select automatic mode, the device automatically selects the appropriate function to maintain
temperature between 20 °C and 25 °C (68 °F and 77 °F). In this mode, temperature can’t be changed or
displayed on remote control. When turned on the frst time, the unit works in AUTO mode by default.
COOL mode:
When you select COOL mode, the appliance is cooling the room. Press " + " or " - " to set temperature.
DRY mode:
When you select DRY mode, the appliance is in dehumidifying mode and works at its lowest speed. In this
mode, the fan speed can’t be changed.
FAN mode:
When you select FAN mode, only the fan is operating. There is no heating, nor cooling in this mode.
HEAT mode:
When you select HEAT mode, device is working on heating mode. Press the " + " or " - " button to adjust
temperature.
NOTE:
• In HEAT mode, the device will delay start-up of the fan to prevent cool air to circulate. This delay can
take up to 5 minutes depending on indoor air temperature.
To Next Page
Loading...
Need help?
General
