10
OPERATION OF REMOTE CONTROL
NOTES:
• This is a general remote control that could be used for multifunction appliances. If you push a button
which is not featured on the model, the unit will continue to work as is.
• After powering it, the device will beep. Working indicator "
" is activated (in red). After that, you can
operate the unit with the remote control.
• When you are using the remote control for the first time or after replacing batteries, set up the hour
with the button CLOCK.
• In ON mode, when you push a button on the remote control, the icon "
" blinks one time and device
beeps to confirm that the signal has been sent to the appliance.
• In OFF mode, temperature and clock icons will be displayed on the remote control (if functions TIMER
ON, TIMER OFF or LIGHT are activated, they will also be displayed). In ON mode, display will show icons
of chosen functions.
• When operating buttons on the cover of the remote control, please make sure the cover is completely
closed.
ICON IDENTIFICATION
ON REMOTE CONTROL DISPLAY
WiFi
Set fan speed
TURBO mode
Send signal
Healthy mode
Scavenging functions
8 °C(46 °F) heating function
Set temperature
WIFI function
X-FAN function
Time setting
TIMER ON / TIMER OFF
Child lock
SLEEP function
Clock
I FEEL function
Quiet
Up & down swing
Left & right swing
Operation mode
AUTO mode
COOL mode
DRY mode
FAN mode
HEAT mode
Temperature display type
Set temperature Indoor ambient temperature
Outdoor ambient temperature
Light
To Next Page
Loading...
Need help?
General
