Outback Power Systems FLEXnet DC User Manual

27
To activate the invert logic function, press the <YES> soft key;
press the <NO> soft key to deactivate it. Press the <DOWN>
soft key to view the last AUX screen.
ADV/DC/AUX/INVERT---------
invert logic
DOWN YES NO TOP
Change the SOC low % values using the <INC> and <DEC>
soft keys. Press the <DOWN> soft key to continue.
ADV/DC/AUX SOC LOW--------
SOC low %
DOWN INC DEC TOP
ADV/DC/AUX----------------
aux parameters
complete
TOP ADV MAIN
Change the high setpoint delay minutes using the <INC> and
<DEC> soft keys. Press the <DOWN> soft key to continue.
ADV/DC/AUX/HI DELAY HIGH-
high setpoint delay
minutes
DOWN INC DEC TOP
Set the low setpoint delay minutes using the <INC> and
<DEC> soft keys. Press the <DOWN> soft key to continue.
ADV/DC/AUX/LO DELAY HIGH-
low setpoint delay
minutes
DOWN INC DEC TOP
Press the <ADV> soft key.
Press the <DC> soft key.
ADV--------------------------------
choose device:
FX CC DC MATE
Pressing the <PG2> soft key.
ADV/DC/PAGE 1----------------
choose category
ADV BAT SHUNT PG2

Outback Power Systems FLEXnet DC Specifications

General

Brand	Outback Power Systems
Model	FLEXnet DC
Category	Battery Charger
Language	English