Outlaw 5000 - Before You Begin; General Setup Advice

Outlaw Audio
4
Model 5000
Five-Channel
Power Amplier
Congratulations! As the owner of an
Outlaw Model 5000 Five-Channel Power
Amplier, you are in possession of a unique
product. Designed in the United States, it has
been carefully designed to deliver the best
possible sonic performance. We welcome you
to Outlaw Audio, and hope that your new
amplier brings many years of enjoyable
listening to your music or home theater system.
Overview
The Outlaw 5000 is a state of the art, high performance,
audio power amplier. It is built utilizing totally comple-
mentary circuitry from input to output.
The Model 5000 features:
¼ 120 watts RMS x 5 (all channels driven simultaneously
@ 8 ohms from 20Hz to 20kHz with less than 0.02%
total harmonic distortion, A-weight lter).
180 watts RMS x 5 (all channels driven simultane-
ously@ 4 ohms 20Hz to 20kHz with less than 0.03%
total harmonic distortion, A-weight lter).
¼ Custom-designed high current power supply driven by
a .9 KVA torrodial transformer.
¼ Four discrete output devices for each channel pro-
tected by an advanced protection circuit.
¼ Four 6,800µF capacitors per channel lter capacitance
¼ Custom-designed heatsinks on each amplier module,
enabling the amplier to function at full power
without the need for noisy fans.
Features
Model 5000
Features
Unpacking
Your new amplier’s shipping carton and packing materials
were specially designed to cushion it from shocks and
vibration during transit. We require you save these materi-
als in case the unit ever needs to be shipped back to us for
any reason. To minimize the size of the carton in storage,
carefully open the top and bottom aps and fold the carton
at. Other cardboard inserts may be stored the same way.
Other packing materials should be saved along with the
carton in a plastic bag.
Your new amplier is engineered using heavy-duty materi-
als for high reliability and weighs 50 pounds and requires
that you pay special attention during unpacking and instal-
lation. You may wish to have someone help you remove the
unit from its carton and place it in the proper location.
After you unpack the Model 5000, please check to make
sure the following accessories are in the box:
¼ Owner’s Manual
¼ AC Power Cord
¼ Trigger Cable
If any of the above is missing from your shipment, please
contact Outlaw Audio immediately.
Save all packing
materials
Before you Begin
In order to receive the maximum enjoyment from your new
amplier, please take a few minutes to read this manual.
This important information will help you make certain that
the amplier is properly congured for operation with the
rest of the equipment in your system. This brief investment
of time will provide major dividends by making certain that
your amplier is properly installed and optimized for the
specics of your installation.
If you have any questions about this product, its installa-
tion or operation, please contact us via e-mail at
customerservice@outlawaudio.com or via tele-
phone at 866-OUTLAWS (688-5297).
Model 5000 Front Panel
Model 5000 Rear Panel
Model 5000
Outlaw Audio LLC
Easton MA USA
Designed in the USA by Outlaw Audio and manufactured in the P.R. China