Need help?Do you have a question about the Outlaw 975 and is the answer not in the manual?
General| Frequency Response | 20 Hz - 20 kHz |
|---|---|
| Signal-to-Noise Ratio | > 100 dB |
| Input Sensitivity | 200 mV |
| Input Impedance | 47 kΩ |
| HDMI Inputs | 7 |
| HDMI Outputs | 2 |
| 4K Support | Yes |
| Dolby Atmos | Yes |
| DTS:X | Yes |
| Weight | 25 lbs |
| Type | Preamplifier/Processor |
| Power Output | N/A (Preamp/Processor) |
| Damping Factor | N/A (Preamp/Processor) |
Warns against user servicing; refers to qualified personnel for repairs.
Lists conditions that necessitate professional servicing of the unit.
Advises turning off components before connecting new ones to prevent damage.
Guides on placing the unit for proper operation, ventilation, and safety.
Warns against opening the unit due to shock hazard and voiding the warranty.
Highlights key features and specifications of the Model 975 preamp/processor.
Details the controls and indicators on the front panel of the Model 975.
Describes the connections and ports available on the rear panel of the Model 975.
Guides on connecting various audio sources to the Model 975.
Details how to connect video sources and displays to the Model 975.
Guides configuring speaker size, distance, and crossover settings.
Details assigning video/audio connections to Model 975 inputs.
Guides on choosing the desired audio/video input source.
Covers selecting different matrix surround sound modes.
Configures speaker size settings (Small/Large) which affect audio processing.
Provides instructions for programming the remote using 4-digit codes.
Explains programming the remote by automatically searching for device codes.
Enables volume controls to bypass the selected device and control the Model 975.
Allows channel controls to bypass the selected device and control another device.
Explains how to perform a factory reset on the Model 975 to resolve operational issues.
To Next Page
