High Temp./Low Temp. Service and Jacketed
ULTRA OVAL
Meter Sizes 50, 52, 53, 55, 56, 57
Register type A
Every ULTRA OVAL is fabricated and shipped from our factory under stringent quality control. In order
to maintain its design performance throughout the life of the meter, this manual offers the operator the
necessary installation, operation and maintenance information.
Be well familiar with these instructions before you place the meter in service and keep this manual at the
field location for ready reference.
The standard, high temperaure-, low temperature-service, and jacketed type meters all have in common
the same specifications described in this instruction manual except for some difference in the jacketed
type on its piping procedure and operating precautions. Be careful to observe the instructions given with
a reminder "See also page 18 for the jacketed type."
◆ About Meter Size Designation ◆
The size of OVAL positive-displacement flowmeters is basically identified by a two-digit code. For
complate details, see Section 18 PRODUCT CODE CONFIGURATION..
Meter Sizes 52, 53, 55, 56
with heating tube
Meter Size 57
with cooling tube
Meter Size 50
with cooling tube
Ins. No. B-144-12-E
To Next Page
Need help?
General
