oventrop Hydrocontrol MTR - Product-Specific Risks

"Hydrocontrol MTR" (lead-free) Safety Notices
5
NOTE
Signal word (without a
warningsymbol)marking
potential material
damages.
WARNING
Warningsymboland
signalwordmarkinga
medium-riskhazardthat
couldpossiblyresultin
deathorseverebodily
injuryifitisnotavoided.
CAUTION
Warningsymboland
signalwordmarkinga
low-riskhazardthatcould
possiblyresultinmildor
moderatebodilyinjuries
or material damages if it
isnotavoided.
WARNING
Fittings under pressure
– hot/cold liquid!
Risk of burns
from surfaces!
Onlyperformworkwhenthe
system is depressurized.
  Shut down the system
section and allow it to cool
beforecarryingoutallwork.
  Allowliquids to drain in a
 controlledfashion.
Checkfor leaks before
 startingupthesystem.
Maintain permissible
operating pressure during
 initialsystemoperation.

Wearsafety glasses and
gloves.

 Avoidunprotectedcontact
 withhot/coldsystemparts.
Beforeperforminganywork,
 waituntilsurfacescanbe
 touchedwithoutriskof
 injury.
Danger of injury due to
inadequate qualifications!

 Have installation, maintenance
andrepairscarriedoutby
 qualiedpersonnelonly.
3.3 Product-SpecicRisks
Theremayberesidual risks to
people and material property
fromassembling and usingthe
product.Forthisreason,obser-
vethefollowingsafetynotices: