oventrop Hydrocontrol MTR - 6 Maintenance & Repairs; 7 Decommissioning & Disposal

Maintenance & Repairs "Hydrocontrol MTR" (lead-free)
22
6. Maintenance & Repairs
7. Decommissioning & Disposal
Thevalveismaintenance-free.
In case any repairs are neces-
sary, please contact your local
installer or use the Oventrop
contact address specied in
sec.2.1.
WARNING
Dangerfromttings
under pressure!
Disassemblingwork
performedonaHVAC
system when it is run-
ning isdangerous.Liquid
when under pressure
canbeveryhot, and its
uncontrolled release can
resultinsevereinjuries.
  Performallworkona
depressurizedand
cooled-offsystemonly.
  Shut down the system
sectionandallowliquid
to drain in a controlled
fashion.
  Wearsafetyglasses
andgloves.
Oncethevalvehasreachedthe
end of its useful life or if there is
adefectthatcannotberepaired,
you will need to remove and di-
spose of it in an environmen-
tally safe manner or recycle its
materialcomponents.
Whenrecycling:
• Scrapthemetals.
• Recycleplasticelements.
• Dispose of other
components according to
materialcomposition.