oventrop Multidis SF - Accessories and Spare Parts; Dimensions; Performance Data; Technical Data

Multidis SF
Accessories and spare parts
(Example: Presetting 2.5 = 2.5 turns)
. Turn the adjusting screw against the valve
spindle as far as it will go using a 6mm
hexagonal spanner.
The last set value can be restored using
the adjustment screw if, for example, the
heating/cooling circuit is shut off by the
valve spindle at a later time.
. Perform this procedure for all heating and
cooling circuits.
3.4 Technical data
3.4.1 Performance data
Max. operating
temperature
+°C
Min. operating
temperature
-°C
Max. operating
pressure
bar (kPa)
Max. differential
pressure
bar (kPa)
kvs value
.m

/h
3.4.2 Dimensions
max. 26
G1
G3/4
200
50
L
SW37
32.5
52.5
max. 75
Fig. 5: Dimensions
Item no. Circuits Length (L)
   mm
   mm
   mm
   mm
   mm
   mm
   mm
   mm
   mm
   mm
   mm
4. Accessories and spare parts
The product is supplied with extensive
accessories (see par. 1.2 on page 17). Ball
valves and heat meters are not included in the
scope of delivery.
You can obtain spare parts and accessories
from specialist stores.
22 140655281-V01.07.2021