Ovesco remOVE DC Impulse - Components and Products Required for Use

English; Version 08 | 2019-04-24
remOVE DC Impulse 400.01
Instructions for use
11 / 32
9 Components and products required for use
The remOVE DC Impulse may only be used in conjunction with manufacturer-
approved accessories and products as detailed in the instructions for use.
The use of accessories, cables and transducers, other than those the remOVE DC
Impulse was designed for, can significantly increase emissions and reduce
immunity of the remOVE DC Impulse against interference.
E
remOVE DC Impulse incl. accessories
Ref. No. 400.01
F
remOVE DC Cutter Set 12 / 14 (remOVE DC
Cutter, remOVE SecureCap 12 / 14, remOVE
Grasper, remOVE Shield)
Ref. No. 400.02.01/
400.02.02
Figure 5: Products required for use