To Next Page

To Previous Page

Page 14

Stripe (RAID 0) - Two volumes will mount on your desktop, each made

up of a high-speed RAID-0 Stripe - combining two volumes each. Using

a RAID-0 Stripe format, if you had 4 1TB drives in your OWC Mercury

Elite 4 Bay RAID Rack, you would have 2 2TB volumes mount on your

desktop.

(IMPORTANT) Realize that reconguring your RAID will destroy

all data on this storage enclosure. Be sure you have a backup

before proceeding. Make sure that the power is turned o.

Look at the back of the OWC Mercury Elite 4 Bay RAID Rack and

locate the switches to the right of the USB port. Make sure they

are both on the “RAID 0” position (RIGHT).

Choose the connection method you desire (USB, FireWire 800),

and power on the OWC Mercury Elite 4 Bay RAID Rack enclo-

sure. You will see these dialog boxes pop up. Click on “Initialize”.

Step

Setup your OWC Mercury Elite 4 Bay RAID Rack as a

RAID-0 (2 striped hard drives) on a Macintosh

Questions and Answers:

Need help?

Do you have a question about the OWC Mercury Elite RAID and is the answer not in the manual?

OWC Mercury Elite RAID Specifications

General