50 GB/IE
try changing the location (e.g. place the temperature station near
to a window).
Reception may be considerably reduced by obstructions (e.g. con-
crete walls) or sources of interference (e.g. other electrical devices).
If the reception of the radio signal continues to be interrupted, you
can turn on / off the automatic radio time receive function manually.
Press and hold down the – button
17
for about 3 seconds.
DCF
11
is shown in the LC display, the automatic radio time
receive function is turned off. Now you can set the time and
date manually (see “Setting the time format / zone / date /
time / language / temperature unit manually”).
Press and hold down the – button
17
for about 3 seconds
again. DCF
11
disappear, the automatic radio time receive
function is turned on. The temperature station will start the
reception of the radio time during early morning.
To Next Page
Loading...