Owon CMS101 - How to Connect with Android Device

2.Quick Start
11
2.
Scale (
In the vertical direction, each grid represents a specific voltage or
current value.
)
3. The trigger status indicates the following information:
Trig：A trigger has been detected and post trigger information is being
collected.
Ready:All pre trigger data have been obtained and the oscilloscope is
ready.
Scan:Continuously collect and display waveform data.
Stop:Stop collecting waveform data.
4. Automatic shutdown sign: Displays the flag when enabled. Closing will
hide the identity.
5. Bluetooth sign: Displays the flag when enabled. Closing will hide the
identity.
6. Battery power and external power supply indication.
7. Rms value.
8. Trigger horizontal displacement.
9. Trigger level position.
10. Measurement value.
11. Operation menu.
12. Waveform display area.
13. Channel waveforms.
14. Frequency value.
How to Connect with Android Device
(1) On the mobile device, scan the QR code below and follow the instructions
to install the free multimeter app.