Owon PC321-TY - Troubleshooting Wi-Fi Issues; Resolving Wi-Fi Configuration Failures

14
5. After the connection succeeds, you can rename it and click 'Done'
to complete the configuration. (If failed, please refer to FAQ3 to
troubleshoot)
2. How to identify the Power Clamp is powered on?
1. You can press the reset button once, if the LED indicator 󽗊ashes red
3 times, which means the device is powered on.
3. Wi-Fi con󽗉guration of the device failed
- Con󽗉rm the entered router password is correct.
- Ensure that the DHCP service is enabled for the router. If not, the IP
address will be occupied.
- Please con󽗉rm the Wi-Fi network is stable:
Put the phone besides your device and make sure they are in the same
network environment, try to open a website to judge if the network can
be used.
- If your router supports both 2.4Ghz and 5Ghz, please enable the
2.4Ghz channel and add device under 2.4G Wi-Fi channel. You can
follow the following step on the App to con󽗉gure the router.
- Con󽗉rm that both the location permission of phone system and the
App are enabled.