Owon SDS1022 - Vertical System Specifications; Measurement and Trigger Specifications

8.Technical Specifications
58
Performance Characteristics
Instruction
Vertical system
Vertical Resolution
(A/D)
8 bits (2 channels simultaneously)
Sensitivity
5 mV/div
～
5 V/div
Displacement
±
2
V (
5
mV/div – 100 mV/div)
±50 V (200 mV/div – 5 V/div)
Analog bandwidth
SDS1022
100 MHz
SDS1102
200 MHz
Single bandwidth
Full bandwidth
Low Frequency
≥10 Hz (at input, AC coupling, -3 dB)
Rise time (at input,
Typical)
SDS1022
≤ 17.5 ns
SDS1102
≤ 3.5 ns
DC gain accuracy ±3%
DC accuracy (average)
Delta Volts between any two averages of
≥16 waveforms acquired with the same
scope setup and ambient conditions (
△
V):
±(3% reading + 0.05 div)
Waveform inverted ON/OFF
Measurement
Cursor
△V, △T, △T&△V between cursors,
auto cursor
Automatic
Period, Frequency, Mean, PK-PK, RMS, Max,
Min, Top, Base, Amplitude, Overshoot,
Preshoot, Rise Time, Fall Time, +Pulse
Width, -Pulse Width, +Duty Cycle, -
Duty
Cycle, Delay A→B , Delay A→B
, Cycle
RMS, Cursor RMS, Screen Duty, Phase,
+Pulse Count, -
Pulse Count, Rise Edge Count,
Fall Edge Count, Area, and Cycle Area.
Waveform Math
＋, －, *, / ,FFT
Waveform storage 16 waveforms
Lissajous
figure
Bandwidth
Full bandwidth
Phase
difference
±3 degrees
Communication
port
USB 2.0 (USB storage）
Counter
Support
Trigger:
Performance Characteristics
Instruction
Trigger level range Internal ±5 div from the screen center
Trigger level
Accuracy (typical)
Internal
±0.3 div