EasyManua.ls Logo

PAC OS-5 User Manual

PAC OS-5
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1
OS-5
Radio Replacement with OnStar® Retention for General
Motors Vehicles
Introduction & Features
Important Notes
Wiring Connection Chart
Illustration / Schematic
The OS-5 interface allows the replacement of a factory radio in select General Motors vehicles with 29-bit LAN radios.
Using this interface will retain factory features such as OnStar, warning chimes, Rear Seat Controls (RSC), factory XM
Radio and the BOSE amplier when the original radio is removed. The OS-5 also provides data bus driven outputs such
as retained accessory power (RAP), vehicle speed sensor (VSS), illumination, reverse trigger and parking brake.
1. The OS-5 will retain the use of the factory XM receiver. Factory SWC or RSE controls must be present for use of this feature.
2. SWI interface must be used in conjunction for SWC retention.
3. RSC buttons that are identical to the SWC will mimic the SWC function for function.
Red / White Parking Brake
Output (-)
Purple / White Vehicle Speed
Output
Blue OnStar® Volume
Adjust
Blue / White Amp Turn On Input
Orange / White Illumination Output
(+)
Green Reverse Output (+)
Brown Loop Mute Loop - See
installation note 7.
Aftermarket Radio Connections
Yellow Battery +12v
Black Ground
Red Accessory Output
White Front L + input
White / Black Front L - input
Grey Front R + input
Grey / Black Front R - input
Green Rear L + input
Green / Black Rear L - input
Purple Rear R + input
Purple / Black Rear R - input
Wiring
Aftermarket
Radio
Connections
Vehicle
Connections
Sub, Center Channel
& Rear Camera
Connections
XM Audio
Connections
Connect to SWC
Interface. Program
for Version 2.
OS-RADPWRAUDIO
XM R
XM L
SWC Interface
Connections
Pacific Accessory Corporation
Question and Answer IconNeed help?

Do you have a question about the PAC OS-5 and is the answer not in the manual?

PAC OS-5 Specifications

General IconGeneral
BrandPAC
ModelOS-5
CategoryRecording Equipment
LanguageEnglish

Summary

Introduction & Features

Important Notes

Key points regarding SWC retention, factory XM, and RSC button functionality.

Installation Steps

SWC Output Connector

Details on the SWC output connector and programming for SWC retention.

OnStar Volume Adjustment

How to adjust OnStar volume using a switch when no SWC is present.

Rear Seat Audio Controls

Dual Zone Source Controls

Controls for aftermarket radio dual-zone audio via rear seat controls.

Factory XM Tuner Controls

Controls for factory XM tuner via rear seat controls.

Rear Seat Entertainment (RSE)

Overhead Screen Only

A/V routing to factory screen for overhead screens.

Overhead & Headrest Monitors

Independent function of headrest monitors and overhead monitor.

Factory XM Tuner With SWC

Testing & Verification

Steps to test and verify the functionality of the installed interface.

Product Updates (Firmware)

Information on updating the OS-5 firmware using a separate updater.

Related product manuals